NZXT H210i Mini-ITX PC Case is a compact and sleek enclosure designed to accommodate NZXT H210i Mini-ITX PC Case motherboards, offering a balance between space-saving design and functionality. Here’s an overview of its features based on typical specifications.
Video Reviews
Damn, they NEARLY nailed it... NZXT H210i (Mini ITX Case) Review
They NEARLY nailed it... The NZXT H210i (Mini ITX Case) is so close to being solid, but falls short in a number of areas.
NZXT H210i Mini-ITX PC Case designed to minimize space while allowing for high-performance components suitable for smaller form factor builds.
Where To Buy?
One of the standout features is the integration of the smart device V2, providing users with seamless control over the RGB lighting and fan speeds. This not only adds a layer of customization but also enhances the overall aesthetics of the build. The smart device simplifies cable management, contributing to a clean and organized interior.
The premium build quality is evident in the construction of the H210i Mini-ITX PC Case. The exterior boasts a sleek and modern design, while the interior is thoughtfully designed for ease of installation and efficient airflow. The inclusion of tempered glass on the side panel allows users to showcase their components and RGB lighting.
Best Deals
Cable management is a breeze with the pre-installed channels and straps, ensuring a clutter-free and visually pleasing interior. The case supports various cooling options, allowing users to configure their system for optimal thermal performance.
Photostream
Despite its compact size, the H210i provides ample storage options, accommodating both SSDs and HDDs. Front I/O ports, including USB and audio, add to the convenience of the case.
the NZXT Mini-ITX PC Case combines smart features, premium aesthetics, and efficient design, making it an attractive choice for enthusiasts looking to build a powerful yet compact system. Whether for gaming or productivity, this case delivers on both functionality and style.
Books & Guides
The Health Care Handbook
Lippincott Williams & Wilkins. 2022
Described in the New York Times as “an astonishingly clear ‘user’s manual’ that explains our health care system and the policies that will change it,” The Health Care Handbook, by Drs. Elisabeth Askin and Nathan Moore, offers a practical, neutral, and readable overview of the U.S. health care system in a compact, convenient format. The fully revised third edition provides concise coverage on health care delivery, insurance and economics, policy, and reform—all critical components of the...
Multiple Mini Interview (MMI)
The Multiple Mini Interview (MMI) has become the preferred interview format at many health professions programs and medical schools. Applicants seeking admission to these schools face considerable anxiety preparing for these interviews because of a lack of resources available for guidance. Our detailed advice, based on evidence from research in the field and perspectives of admissions faculty, will provide you with the insiders' perspective. How can you best prepare for the MMI? What is...
News
NZXT H210i review: A small, mighty, and seriously good-looking ... - Windows Central
November 24, 2019 - Windows CentralNZXT H210i review: A small, mighty, and seriously good-looking Windows Central
NZXT H210i ITX Case Review – A Not So Small But Cheerful Chonk - Wccftech
July 19, 2020 - WccftechNZXT H210i ITX Case Review – A Not So Small But Cheerful Chonk Wccftech
The best mini-ITX PC case in 2023 - PC Gamer
March 20, 2023 - PC GamerThe best mini-ITX PC case in 2023 PC Gamer
The Best Mini ITX PC Cases in 2023 - IGN
July 10, 2023 - IGNThe Best Mini ITX PC Cases in 2023 IGN
Best NZXT PC Cases 2021 - Windows Central
January 20, 2021 - Windows CentralBest NZXT PC Cases 2021 Windows Central
conclusion:
conclusion NZXT H210i Mini-ITX PC is suitable for users looking to build a compact, stylish, and functional system. Its sleek design, smart device integration, and efficient use of space cater to those who prioritize aesthetics and space-saving without compromising on performance. Always verify component compatibility and dimensions before selecting a case for your build.
Emma Trudeau, a passionate wordsmith and technology enthusiast, is the driving force behind the captivating content on our blogging website. With a flair for combining creativity and technical insight, Emma has established herself as a go-to authority in the dynamic world of digital writing.
Pros: I had previously built a PC with the NZXT S340 for my brother, but decided to go with this newer model for myself, so a lot of these points are relative to the older model. Overall, the H500 is a straight-up upgrade as far as I’m concerned. – First of all, it looks GREAT. I don’t usually care about PC aesthetics, but the case is very modern, sleek, and minimal, which makes it a great fit for an office. – Having the power button and USB/audio inputs on top of the case is really convenience for me. YMMV. – Cable management is pretty good. The bar is a nice touch, and the pop of color looks great. The power supply is cut off from the rest of the case, so you won’t have tons of visible dangling cables. – Has SSD mounts that are separate from the HDD bays, so you can have a total of 2 SSDs and 2 HDDs (or up to 4 SSDs if you have adapter brackets). – Thermals are better than I expected. In my completely unscientific test, temps seemed about the same (or insignificantly higher) at full load as they were with my HAF XB EVO, which is known for having amazing air flow. – USB 3.1 support is a plus. There aren’t too many cases out there that support this yet. Cons: – Cable management in the back of the case could be better. There isn’t much room back there, and there aren’t any good places to tie down cables, so the space can become very tight very quickly. For this reason, I HIGHLY recommend a modular PSU. – The vertical SSD mounts are a bit finicky; I had a lot of trouble getting the left one to stay on, and it seems like any extra pressure on the plate causes it to pop off completely. – No intake fan, but it didn’t seem to matter for me in terms of temps. – No reset button for the once in a blue moon where you’d actually use it. – A USB Type-C port on top would have been awesome, but I’m being greedy. Overall Review: I switched from a Cooler Master HAF XB EVO. I really liked that case, but after reorganizing my office, I realized that it just takes up way too much horizontal space (and, frankly, it’s kind of an eye sore). For the price, the H500 is great, with only some minor drawbacks, and I would highly recommend it.
Pros: -Built like a tank. Steel inside and out. Real glass side panel. -Very aesthetically pleasing. Beautifully minimal. -Great price to quality ratio. Other cases in this price range pale in comparison. -Can fit two 140mm fans in the front. -Dust filters on the front intake area, top exhaust, and bottom PSU vent. Great for pet owners. -The front fan mount bracket is removable, making fan or radiator installation a breeze. -Cable management is very easy due to the metal “stripe” inside and cable channels in the back with Velcro straps. -Stock NZXT case fans work perfectly fine. -NZXT’s universal 2.5” SSD mounts are AWESOME. Tool-less to mount in the case. -Steel HDD cage. -Pre-installed motherboard stand-offs. -Great for a first-time builder. Cons: Note: I don’t believe these cons are worthy of taking eggs off, as they are completely situational and might not matter to some people. -For a mid-tower, this case is on the small side. My R9 290X which, granted, is a large card, is only a few inches away from my front fans. And my Cryorig H7 CPU cooler almost touches the tempered glass side panel. -This is primarily an aesthetic-oriented case. The actual front is solid metal. Your front fans will be pulling air from vents on the non-glass side and bottom. If you’re looking for a case with crazy airflow, check out the Fractal Meshify C or something similar. (Don’t let this deter you too much though. My Ryzen 5 2600 idles at 27C and floats in the 40s under load.) -Tight to work in if you’re customizing or modifying. I added two RGB strips and getting them oriented perfectly where I wanted them was a pretty meticulous process. You may want to invest in some needle nose pliers or tweezers if you plan to work in the H500’s tight spaces. -Can only fit 4 fans total without modding. Overall Review: This case is perfect for me, as my desk area is pretty small. I can still use my ATX motherboard and full sized GPU, but in a slightly smaller form factor compared to other mid-towers. We also have two cats, so I love that it has dust filters to catch any hair, and they’re removable for easy cleaning. To me, the minimal style is refreshing. It’s a nice break from a lot of towers these days that look like a Transformer sitting on your desk. I am definitely an NZXT fanboy after owning this case. I will continue to use their products because of the quality and design. If this case is even an option in your head, I say go for it!
Pros: Spacious interior which will fit any cooling/ GPU(s)/ ect. you want into it. It also looks great, very sleek and modern. My largest issue with mid-tower cases are that they have a really hard time mounting AIO water coolers. Most mid-towers that you try to install a AIO in will either hit the RAM or the CPU power cable, or, for rear mounted radiators, will bump into the top case fans. This case is a larger mid tower and has none of these problems. This is also a literally solid case, it feels like it could be throw off a building and not be damaged. Cons: Cable management is surprisingly rough. Given its size you would think it would be a breeze. I got a fully modular PSU and still had issues with cable management. The main issue is that the back panel sits to close to the back of the motherboard panel where your cables are. I would have liked another .25-.50 inches of space back there. I had to remove the HDD cage (didn’t need it anyways) to get all the cable nice and cleanly hidden. Another thing is how tight the SSD cables have to be routed. The one you can see on the side of the PSU shroud has to be routed through the HDD cage and you also have to remove the metal bar thing to get the cables through. The same issues go for the SSD mounts that sit on the top of the PSU shroud. Overall Review: Overall this case is solid and if you have a few hours to perfectly rout your cables so they are clean it will fit your needs i just wish it was easier to build with. That being said you only need to build once and after that its a solid, quality case that looks great!